Bath Project – Slate Window Surround Sets

Posted On 18/04/2016

The final part of the stone walling installation is the slate window surround sets, which we fabricated back at our workshop.   

slate window surround sets by Everything Stone

Before fabrication we had to survey and create templates for each window surround set using 12mm ply.

We then carried out the final fabrication works on site, cutting each piece of slate to the correct length.

The installation can now be carried out.

We’ve used Brazilian slate on this project to match the patios and foot paths around the house. The Brazilian slate is 25mm thick and has a very slight riven on the surface.

External flexible adhesive and mechanical fixings are used to secure the slate window surround sets into position.

slate window surround sets by Everything Stone

You can see that the slate sills project past the slate reveals, catching all water run off and dispersing it.

Slate cills always need to be installed at an angle away from the house, these slate cills had a 35 degree angle.

slate window surround sets by Everything Stone

Bringing regularity to an otherwise randomly constructed wall works really well.

slate window surround sets by Everything Stone

The Cornish walling stone was from a quarry up near Delabole – Trecarne Quarry

slate window surround sets by Everything Stone

To view our range of wall cladding click here – Wall Cladding

If you require further information pop into see us in Par near St Austell in Cornwall.

We are open 6 days a week, on Monday to Fridays from 8 – 5 & on Saturdays from 9 – 2.